PrintBar UV Fountain Solution
Suitable for any brand model that contains a fountain solution additive that is particularly suitable for UV printing active ingredients.
Dosage concentration ratio: 2-3%
Used for reducing alcohol printing, isopropyl alcohol (IPA) use ratio: 6%-8%
PH value control stability: 4.8-5.8
Packing: 25 kg/barrel
Density: 1.268%
Place of Origin: Shanghai
Features
1, For any brand offset press, suitable for UV printing.
2, Completely free of formaldehyde, version of the longer life.
3, The best ink balance, reduce the pile of ink on the surface of the blanket, reduce the number of cleaning.
4, Stable ink balance, reduce the amount of ink emulsified ink on the water, effectively control the production of calcium roller surface.
5, No bubbling, no blocking the pipeline, can inhibit the growth of microorganisms contain guard plate components, a long time downtime does not need to protect plastic.
How to use and technical instructions:
Contains dry material that stabilizes the drying process when processing non-absorbent printed materials.
Zi: Contains preservatives - prevents corrosion of printing plates, blankets, and embossing rolls, prevents machine parts made of structural steel, case-hardened steel (ie bearing rings) or stainless steel, and electroplated nickel or sprayed oxide ceramics. The drum is protected against corrosion. The Parts that have been affected by corrosion cannot be worn anymore, otherwise discoloration due to corrosion will occur.
dH: Especially for hard water with a hardness of over 180dH.
It is recommended that the mixing ratio should be between 1.5% and 2%, ie 15 ml or 20 ml of the Fountain Solution against one litre of water. Alcohol concentration 5-8%.
Application Scope
- Packaging and Printing
- Printing of sub-paper and non-absorbent printing materials
- For drying problematic ink printing, such as gold ink printing
- For printing with small amount of ink
- Printing for non-absorbent printing materials
